Instructions for:
Troubleshooting ACE installation issues on MacOS 11 (Big Sur) and MacOS 12 (Monterey)

Currently, MacOS 11 (Big Sur) has a rare but frustrating bug which can cause the “Security & Privacy” preference pane to fail to show the correct prompt during the installation of our ACE component. When this happens, it becomes impossible for a user to properly authorize ACE for installation and use.

System Preferences, not showing an authorization prompt for ACE
An example of a stuck install

This issue has been reported to Apple, and will hopefully be fixed in a forthcoming MacOS update. For now, these instructions will allow you to work around this OS issue.

Try a fresh download

We've seen issues where MacOS fails to properly scan older copies of our software. A fast troubleshooting step to work around this problem in the operating system is to delete your existing copy and download a new copy right from our site.

Get the latest version of your desired app by clicking below:

The new copy will prompt you to complete the setup process, after which you'll hopefully be set.

Manually delete the ACE component files

If you’re still unable to proceed with installing or authorizing ACE from the current release, manually deleting any copy of our component on your Mac will allow MacOS to present the necessary authorization prompt again. Follow these steps:

  1. Quit System Preferences, as well as any and all apps from Rogue Amoeba that are powered by ACE. (That's Airfoil, Audio Hijack, Loopback, Piezo, and/or SoundSource.)

  2. In the Finder, select the Go to Folder… command from the Go menu.

  3. In the folder field, enter the following location:

  4. Press Enter (or click the Go button on older versions of MacOS). In the window which appears, you'll see the ACE.driver folder.

  5. Select that folder, and move it to the Trash.

  6. Confirm this action in the Finder when prompted.

  7. Restart your Mac.

  8. Run one of our ACE-powered apps again to be guided through the installation process again.

If the above steps do not cause the authorization prompt to appear properly, you can follow the next set of steps to manually authorize ACE.

Authorize ACE manually from Recovery

If MacOS still fails to show the correct prompt to authorize our ACE component for use, you’ll need to manually authorize it. This is done by entering the Mac's Recovery mode and applying adjustments to its security policy, using the spctl utility.

  1. To enter the Mac's Recovery mode, follow Apple's instructions for Intel or for Apple Silicon.

  2. Once booted into Recovery, open the Terminal utility there and enter the following commands:

    spctl kext-consent disable
    spctl kext-consent add 7266XEXAPM
    spctl kext-consent enable

  3. After entering those commands, restart your Mac. Launch one of our ACE-powered apps again, and you'll be able to proceed through the installation.

Note: Although the command used is for kext-consent, the ACE component is not a kernel extension.

Once ACE is properly authorized and installed, you’ll be all set for the future: newer updates to the component can be installed, or it can be uninstalled and even reinstalled, without requiring any further system-level authorization.

If you need any further help, please don’t hesitate to contact us directly.